Asian Paints Smartcare Damp Proof

Asian Paints Smartcare Damp Proof is an advanced terrace waterproofing solution against ordinary chemical waterproofing. Damp Proof comes with an 8-year warranty and 10-degree temperature reduction. Waterproofing filter applied with glass fiber-lined elastomeric liquid and gives a high sheen finish. SmartCare Damp Proof forms a dense, smooth, durable membrane for ultimate waterproofing.

8 Years Warranty

A warranty on vertical surfaces and terraces for 8 years.

Strong Adhesion

Strong adhesion to masonry substrates.

High Sheen

A high sheen, brilliant white colour and thick coat results in high levels of heat reflectance.

8 Years Warranty

A warranty on vertical surfaces and terraces for 8 years.

Strong Adhesion

Strong adhesion to masonry substrates.

High Sheen

A high sheen, brilliant white colour and thick coat results in high levels of heat reflectance.

Features of Smartcare Damp Proof

High Sheen Finish
Alkali Resistance
Reduce Heat

8 Years Warranty
Crack Bridging
Lead Free

Anti Carbonation
Strong Foundation
Water Proofing

Painting Process of Smartcrae Damp Proof

Repainting:
Touch up putty⟶ 1 Coat of primer⟶ 2 Coats paints

Fresh Painting:
1 Coat Primer⟶ 2 Coats of Putty⟶ 1 Coat of Primer⟶ 2/3 Coats of Paint

1. Masking

Covering furniture, switch boards, other elements with plastic sheets.

2. Surface preparation

Old paint is scraped using sand paper to remove flakes, loose particles.

3. Touch-up/ Full putty

Fill the cracks & pores, damages or apply 2-3 coats of full putty.

4. Apply Primer

To ensure better adhesion of paint, increase durability and protection for walls.

5. Painting

Apply 2/3 coat of paint after drying the first coat. Ceiling first then on walls.

6. Cleaning

To ensure there is no single drop of paint falling on floors or other places.

Painting Process of Smartcrae Damp Proof

Repainting:
Touch up putty⟶ 1 Coat of primer⟶ 2 Coats paints

Fresh Painting:
1 Coat Primer⟶ 2 Coats of Putty⟶ 1 Coat of Primer⟶ 2/3 Coats of Paint

1. Masking

Covering furniture, switch boards, other elements with plastic sheets.

2. Surface preparation

Old paint is scraped using sand paper to remove flakes, loose particles.

3. Touch-up/ Full putty

Fill the cracks & pores, damages or apply 2-3 coats of full putty.

4. Apply Primer

To ensure better adhesion of paint, increase durability and protection for walls.

5. Painting

Apply 2/3 coat of paint after drying the first coat. Ceiling first then on walls.

6. Cleaning

To ensure there is no single drop of paint falling on floors or other places.

Asian Paints Smartcare Damp Proof

Package	Price
4 Liter	₹ 1256
20 Liter	₹ 4200

Asian Paints Smartcare Damp Proof

PRODUCT INFORMATION SHEET

WARRANTY DOCUMENT

Schedule a free inspection

Frequently Asked Questions

Smartcare Damp Proof

Frequently Asked Questions

Smartcare Damp Proof

How do you apply Asian Paints SmartCare Damp Proof?

Follow the listed steps for proper implementation of Damp Proof:

1) Clean the surface well and remove any dirt, grease, or loose dust particles. It is advised to use a strong wire brush or a high-speed water jet.

2) A small hammer can be used to test the soundness of the substrate. Both cracks and weakened areas of up to 3 mm should be treated with SmartCare Crack Seal.

3) Apply a self-priming coat of SmartCare Damp Proof (diluted with water in a 3:1 ratio).

4) Apply two perpendicular coats of SmartCare Damp Proof without dilution. When the substance is already damp, apply SmartCare Joint Tapes to both corners and joints. Achieve a forced coverage of 10 square feet per liter for the machine.

5) Allow for 4-6 hours drying time between coats.

What precautions should be taken when using Asian Paints SmartCare Damp Proof?

When using SmartCare Damp Proof, there are a few steps of precaution that we should take care:

1) Do not use SmartCare Damp Proof while it is raining or very hot.

2) Avoid violations that may result in membrane puncture.

3) Apply SmartCare Damp Proof at least 6 inches within the drain pipe.

4) For better performance, add parapet to parapet to fully encircle the building.

What are the suggested area of applications for SmartCare Damp Proof?

following are the suggested area of application for Smartcare Damp Proof

1) All external masonry surfaces that are vulnerable to water ingress.

2) Roofs/terraces of buildings, parapets, sunshades, and external vertical walls.

3) Damp Proof should be seen on pre-existing IPS, sound brick-bat Coba, or cementitious waterproofing.

How do you apply Asian Paints SmartCare Damp Proof?

Follow the listed steps for proper implementation of Damp Proof:

1) Clean the surface well and remove any dirt, grease, or loose dust particles. It is advised to use a strong wire brush or a high-speed water jet.

2) A small hammer can be used to test the soundness of the substrate. Both cracks and weakened areas of up to 3 mm should be treated with SmartCare Crack Seal.

3) Apply a self-priming coat of SmartCare Damp Proof (diluted with water in a 3:1 ratio).

4) Apply two perpendicular coats of SmartCare Damp Proof without dilution. When the substance is already damp, apply SmartCare Joint Tapes to both corners and joints. Achieve a forced coverage of 10 square feet per liter for the machine.

5) Allow for 4-6 hours drying time between coats.

What precautions should be taken when using Asian Paints SmartCare Damp Proof?

When using SmartCare Damp Proof, there are a few steps of precaution that we should take care:

1) Do not use SmartCare Damp Proof while it is raining or very hot.

2) Avoid violations that may result in membrane puncture.

3) Apply SmartCare Damp Proof at least 6 inches within the drain pipe.

4) For better performance, add parapet to parapet to fully encircle the building.

What are the suggested area of applications for SmartCare Damp Proof?

following are the suggested area of application for Smartcare Damp Proof

1) All external masonry surfaces that are vulnerable to water ingress.

2) Roofs/terraces of buildings, parapets, sunshades, and external vertical walls.

3) Damp Proof should be seen on pre-existing IPS, sound brick-bat Coba, or cementitious waterproofing.